TM 55-1945-205-24-2
0322 00 5/6 blank
0322 00
6.
Install other end of hose (15) with hose clamp (4) on fuel filter (3). Tighten clamp (4).
7.
Install new hose (7) with hose clamp (6) on fuel filter (3). Tighten clamp (6).
8.
Install other end of hose (7) with snap clamp (11) on fuel hose connector (1). Tighten clamp (11).
9.
Install new o-rings (10) in each fuel hose connector (1 and 8).
INSTALL RHIB ENGINE FUEL TANK HOSE AND BULB
1.
Attach fuel hose connector (8) to engine by depressing spring flange (9) and pushing inwards. Release flange (9)
to lock hose (7) in place.
2.
Attach fuel hose connector (1) to fuel tank by depressing spring flange (2) and pushing inwards. Release
flange (2) to lock hose (12) in place.
WARNING
3.
Clean up spilled fluid with a spill kit and dispose of spill kit waste in accordance with local procedures.
4.
Install RHIB battery negative lead terminal. (WP 0336 00)
5.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
