TM 55-1945-205-24-2
0322 00 3
0322 00
WARNING
6.
Remove fuel hose connector (8) from engine by depressing spring flange (9) and pulling backwards.
WARNING
7.
Drain hose (7) into drain pan.
WARNING
8.
Remove drain pan and dispose of contents in accordance with local procedures.
DISASSEMBLE RHIB ENGINE FUEL TANK HOSE AND BULB
1.
Remove and discard two o-rings (10) from ends of two fuel hose connectors (1 and 8).
2.
Remove two snap clamps (11) securing hoses (7 and 12) to fuel hose connectors (1 and 8).
3.
Remove two snap clamps (13) securing hoses (5 and 12) to nipple and valve assemblies (14 and 15).
4.
Remove two large band clamps (16) securing two nipple and valve assemblies (14 and 15) to primer bulb (17).
5.
Remove two nipple and valve assemblies (14 and 15) from primer bulb (17).
CLEAN RHIB ENGINE FUEL TANK HOSE AND BULB
WARNING
1.
Use cleaner and wiping rags to remove debris or dirt from the exterior of all components.
