TM 55-1945-205-24-2
0089 00 2
0089 00
3.
Turn globe protective cage (1) counterclockwise until cover is freed from protrusion (3) on base of light fixture (4)
and slowly remove.
4.
Turn globe (5) counterclockwise until threads are clear of fixture (4).
5.
Slowly remove globe (5) from fixture (4).
6.
Remove DC light bulb (6) and discard.
INSTALL GENERATOR CONTAINER DIRECT CURRENT (DC) LIGHT BULBS
1.
Install new DC light bulb (6) in light fixture (4) and tighten.
2.
Slowly slide globe (5) over DC light bulb (6).
3.
Turn globe (5) clockwise and tighten.
4.
Slowly slide globe protective cage (1) over globe (5).
5.
Turn globe protective cage (1) clockwise until protrusions (3) on fixture (4) are not visible and screw holes
are aligned.
6.
Place screw (2) in hole and tighten.
7.
Turn light switch to on position and verify DC light bulb illuminates.
END OF WORK PACKAGE
6
4
5
