TM 55-1945-205-24-2
0092 00 2
0092 00
4.
Remove two screws (7) securing the retaining plate (8) to the side of the door (9).
5.
Remove the bolt assembly (10) and lockset (2) from door (9) and discard lockset (2).
REMOVE PERSONNEL SHELTER INTERIOR DOOR HASP
1.
Remove four screws (11) from the base of the hasp (12).
2.
Remove hasp (12) from interior door (9) and discard.
3.
Remove four screws (11) from the base of the lockring (13).
4.
Remove lockring (13) from interior door frame (14).
INSTALL PERSONNEL SHELTER INTERIOR DOOR LOCKSET
1.
Install new lockset (2) and bolt assembly (10) into the holes in the interior door (9).
2.
Install retaining plate (8) over the bolt assembly and secure with two screws (7). Tighten screws (7).
3.
Install interior door plate (5) over the lockset (2) and secure to the exterior plate (6) with two screws (4).
Tighten screws (4).
4.
Snap inner cover plate (3) onto the interior door plate (5).
5.
Push interior door handle (1) onto the lockset until it locks in place.
INSTALL PERSONNEL SHELTER INTERIOR DOOR HASP
1.
Position new hasp (12) on interior door (9).
2.
Install four screws (11) through hasp (12) and into interior door (9). Tighten screws (11).
3.
Position lockring (13) on interior door frame (14).
4.
Install four screws (11) in base of lockring (13) and into interior door frame (14). Tighten screws (11).
END OF WORK PACKAGE
11
11
12
13
9
14
