LUBRICATE RHIB STEERING ROD, TILT TUBE AND SUPPORT BRACKET HOLES

RIGID HULL INFLATABLE BOAT STEERING ROD, TILT TUBE AND SUPPORT BRACKET HOLES

RIGID HULL INFLATABLE BOAT STEERING SYSTEM HELM PUMP

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
697

TM 55-1945-205-24-2 0263 00 2 0263 00 WARNING 4. Apply ball and roller bearing grease to holes in two support brackets (7). WARNING 5. Apply ball and roller bearing grease to threaded ends of tilt rod (6). WARNING 6. Apply ball and roller bearing grease to threaded ends of steering rod (3). 7. Position two support brackets (7) on tilt tube (6) and steering rod (3). 8. Install two flat washers (5) and nylok nuts (4) on tilt tube (6). Tighten nylok nuts (4). 9. Install two flat washers (2) and nylok nuts (1) on steering rod (3). Tighten nylok nuts (1). 10. Install RHIB battery negative lead terminal. (WP 0336 00) END OF WORK PACKAGE

Privacy Statement
Press Release
Contact