TM 55-1945-205-24-2
0264 00 2
0264 00
2.
Remove steering wheel (2).
3.
Remove and retain the woodruff key (3).
4.
Remove the four lock nuts (4) and washers (5) from the studs (6) under control console (7).
5.
Remove the helm pump (8) and discard.
INSTALL RHIB STEERING SYSTEM HELM PUMP
1.
Align the studs (6) of new helm pump (8) with holes in the control console (7).
2.
Install four washers (5) and nuts (4) on studs (6). Tighten nuts (4).
3.
Place woodruff key (3) in the groove of steering wheel shaft (9).
4.
Install steering wheel (2).
5.
Install steering wheel shaft nut (1).
6.
Torque nut (1) to 150 in. lbs (16.9 N-m).
7.
Install RHIB power steering system hoses. (WP 0261 00)
8.
Install RHIB battery negative lead terminal. (WP 0336 00)
9.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
