TM 55-1945-205-24-2
0266 00 2
0266 00
2.
Remove nut (3) from gage post (4).
3.
Remove and discard any interfering tiedown straps.
4.
Remove throttle control horn (5) from gauge post (4) and discard throttle control horn (5).
INSTALL RHIB THROTTLE CONTROL HORN
1.
Position new throttle control horn (5) on gauge post (4).
2.
Install nut (3) on gauge post (4). Tighten nut (3).
WARNING
3.
Coat the instrument cable plug (2) with grease.
4.
Insert the instrument cable plug (2) into the throttle control horn receptacle (1).
5.
Press the instrument cable plug (2) and throttle control horn receptacle (1) firmly together.
6.
Secure wire bundle in place with tiedown straps as required.
7.
Install RHIB battery negative lead terminal. (WP 0336 00)
8.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
