RIGID HULL INFLATABLE BOAT SPOTLIGHT BULB

INSTALL RHIB INSTRUMENT PANEL CIRCUIT BREAKERS

RIGID HULL INFLATABLE BOAT INFLATABLE TUBE - TM-55-1945-205-24-2_881

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
743

TM 1945-55-205-24-2 0279 00 1/2 blank 0279 00 UNIT LEVEL MAINTENANCE ROLL-ON/ROLL-OFF DISCHARGE FACILITY RIGID HULL INFLATABLE BOAT SPOTLIGHT BULB REPLACEMENT INITIAL SETUP: Tools Gloves, Men’s and Women’s (Leather Palm) (Item 27, WP 0359 00) Goggles, Sun, Wind and Dust (Safety) (Item 29, WP 0359 00) Helmet, Safety (Brown) (Item 33, WP 0359 00) Life Preserver, Vest (Item 38, WP 0359 00) Personnel Required Seaman 88K REMOVE RHIB SPOTLIGHT BULB WARNING All personnel must wear personal flotation device, hard hat, safety shoes and gloves during RRDF operations and maintenance. Failure to observe these precautions could result in serious injury or death. 1. Remove spotlight cover (1) from spotlight housing (2) by turning counterclockwise. 2. Remove bulb (3) from the spotlight housing (2) by turning counterclockwise. Discard bulb (3). INSTALL RHIB SPOTLIGHT BULB 1. Install new bulb (3) in spotlight housing (2) by turning clockwise. Tighten bulb (3). 2. Install spotlight cover (1) on the spotlight housing (2) by turning clockwise. Tighten spotlight cover (1). END OF WORK PACKAGE 1 2 3

Privacy Statement
Press Release
Contact