TM 55-1945-205-24-2
0300 00 3
0300 00
9.
Remove armature assembly (13) from housing (1).
10. Remove commutator end cap (3).
11. Remove four springs (14) from holder (15). Discard springs (14).
12. Remove two bolts (16) attaching two ground brushes (17) and holder (15) to commutator end cap (3).
13. Remove two ground brushes (17) and holder (15). Discard ground brushes (17).
14. Remove nut (18), washer (19) and insulating washer (20) from terminal (21).
15. Remove insulated brushes (22), terminal (21) and insulation bushing (23). Discard brushes (22).
CLEAN RHIB ELECTRICAL STARTER
WARNING
1.
Using crocus cloth, remove residual dust from commutator (24).
24
25
13
