TM 55-1945-205-24-2
0311 00 2
0311 00
2.
Remove ground bolt (4) and ground washer (5) on ground wire (6).
3.
Remove two power pack screws (7), securing power pack (3) to engine.
4.
Remove power pack (3) and discard.
INSTALL RHIB ENGINE IGNITION POWER PACK
1.
Position new power pack (3) on the engine.
2.
Install two power pack screws (7) to secure power pack (3) to engine mount. Tighten screws (7).
3.
Connect three ignition coil sockets (1) and three power connectors (2) between power pack (3) and engine.
Remove tags.
4.
Install ground wire (6) with ground bolt (4) and ground washer (5). Tighten bolt (4).
5.
Install RHIB engine cover. (WP 0297 00)
6.
Install RHIB battery negative lead terminal. (WP 0336 00)
7.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
