TM 55-1945-205-24-4
0206 00 3/4 blank
0206 00
4.
Remove hex nut (8) and two washers (9) from upper boom section (10).
5.
Support upper boom section (10) with dunnage.
6.
Remove hex nut (11) and hex head bolt (12) from pivot pin (13).
7.
Remove pivot pin (13) securing pivot support (14).
8.
Slide pivot support (14) off of upper boom section (10) and discard.
INSTALL LIGHT TOWER PIVOT SUPPORT
1.
Position new pivot support (14) on upper boom section (10).
2.
Install pivot pin (13) securing pivot support (14).
3.
Install hex head bolt (12) and hex nut (11) on pivot pin (13).
4.
Position upper boom section (10) on pivot support (14).
5.
Install washer (9) and hex nut (8) securing upper boom section (10). Tighten hex nut (8).
6.
Tighten eyebolt (7).
7.
Remove dunnage from under boom (10).
8.
Thread cable (4) around upper pulley (6).
9.
Install hex head bolt (1), hex nut (2) and washer (3) securing cable (4) at lower pulley (5).
END OF WORK PACKAGE
