TM 5-1940-322-24
0115 00
ENGINE REPLACEMENT (Contd)
21.
Remove four locknuts (1) and washers (2) from engine mounting brackets (3). Discard locknuts (1).
WARNING
All nonessential personnel must stand clear during lifting
operations. Failure to comply may result in injury to personnel.
Keep hands clear of lifting area. Use pry bar to free engine during
lifting operations. Failure to comply may result in injury to
personnel.
Lifting device and chains must have a weight capacity greater than
1,250 lbs (567.0 kg). Failure to comply may result in injury to
personnel and/or damage to equipment.
Do not detach lifting device from engine until all engine weight is
equally distributed and engine is stable. An improperly supported
engine may cause injury to personnel.
22.
Install chain or sling (8) to engine lifting brackets (5) and (7).
23.
Connect lifting device (4) to chain or sling (8).
24.
Raise engine (6) until engine weight is supported by lifting device (4). Remove engine (6) from boat
and place on suitable engine stand or blocks.
1
2
3
0115 00-6
