TM 5-5420-202-20-2
UPPER OIL FILLER TUBE REPLACEMENT (Sheet 4 of 4)
8.
Place clamp (J) on hose (K) with nut facing
you.
Position tube assembly (F) with its assembled
9.
parts on powerplant.
10.
Push tube assembly (F) into hose (K).
11.
Position clamp (J) over end of hose (K).
Place two lockwashers (L) on two screws (M).
12.
Start two screws (M) through clamps of tube
13.
assembly (F).
14.
Using 1/2 inch socket, tighten two screws
(M).
15.
With clamp (J) positioned over end of hose,
use 5/16 inch wrench and tighten nut of clamp
(J).
Position bracket (N), clamp (P), and two screws
16.
(Q).
17.
Start nuts (R) on screws (Q).
Using 1/2 inch socket and 1/2 inch wrench,
18.
tighten nuts (R).
19.
Install powerplant (page 5-14).
End of Task
6-87