TM 5-5420-202-20-2
CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 2 of 6)
REMOVAL:
Using screwdriver, loosen two clamps (A)
1.
holding breather tube (B) to exhaust tube
(C) and breather tee (D).
2.
Remove breather tube (B) from tank.
Using screwdriver, loosen clamp (E).
3.
4.
Using 1/2 inch wrench, remove two screws
and washers (F) holding breather tee (D)
to engine.
Remove breather tee (D), spacer (G) and two
5.
gaskets (H) from engine. Throw gaskets away.
6.
Using
screwdriver,
loosen
7.
Remove clamps (E), (J), and hose (K) from
breather tee (D). Throw hose (K) away.
Go on to Sheet 3
Change 1
