TM 5-5420-202-20-2
FUEL-WATER SEPARATOR FLUID PRESSURE FILTER ASSEMBLY REPLACEMENT (Sheet 2 of 7)
REMOVAL:
1.
Place drip pan under manual drain valve
(A).
Open manual drain valve (A) by turning valve
2.
h a n d l e counterclockwise.
Using 1/2 inch wrench, turn bleed valve
3.
(B) counterclockwise until loose.
A l l o w fuel in fuel-water separator filter
4.
(C) to drain through manual drain valve (A).
5.
Using 1/2 inch wrench, turn bleed valve
(B) clockwise until snug.
6.
Close manual drain valve (A) by turning
valve handle counterclockwise.
7.
Place drip pan under fuel-water separator
filter (C).
Go on to Sheet 3
7-203