TM 5-5420-202-20-2
ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Assembly
TOOLS:
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
2 in. extension with 1/2 in. drive
Putty knife
C r o s s - t i p screwdriver
Gloves (Item 69, Appendix D)
Adhesive (Item 4, Appendix D)
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Goggles (Item 70, Appendix D)
Rags (Item 65, Appendix D)
Remove top deck assembly (page 16-21)
P R E L I M I N A R Y PROCEDURES:
Remove transmission shroud (page 9-2).
DISASSEMBLY:
1.
Using 7/16 inch socket, remove ten screws, washers and lockwashers (A) holding four
seal (B) retainers (C) to engine shroud both right and left side.
Remove retainers (C) from shroud.
2.
Go on to Sheet 2