TM 5-5420-202-20-3
MASTER CONTROL PANEL REPAIR (Sheet 37 of 73)
Circuit Breaker Replacement (Sheet 5 of 7)
REMOVAL; CIRCUIT BREAKER (F):
Using flat-tip scre w driver on scr
1.
(A) and 11/32 inch wrench on nut
remove four screws (A), lockwashers
(C), and nuts (B) securing connector
(D) to panel.
2.
Remove connector (D) from panel and
position aside.
3.
.
Using fingers, remove two electrical
connectors from rear of circuit breaker
(E) by pulling out.
4.
Using cross-tip screwdriver, remove
two screws (F) and lockwashers (G)
securing circuit breaker (E) to panel,
5.
Remove circuit breaker (E).
Go on to Sheet 6
TA249015