TM 5-5420-202-20-3
RIGHT SIDE ENGINE DISCONNECT GROUND LEAD ASSEMBLY REPLACEMENT (Sheet 1 of 1)
TOOLS:
9/16 in. socket with 1/2 in. drive
SUPPLIES:
Lockwashers (4 required)
Ratchet with 1/2 in. drive
Spanner wrench
REFERENCE: TM 5-5420-202-10
PRELIMINARY PROCEDURE:
REMOVAL:
Using socket, remove two screws (A) and
1.
four lockwashers (B) securing two ground
lead terminals (C) to hull wall.
2.
Using spanner wrench, remove electrical
connector (D) from engine.
Remove ground lead assembly (E).
3.
INSTALLATION:
1.
Using spanner wrench, install electrical
connector (D) to engine.
Place two ground lead terminals (C), four
2.
lockwashers (B), and two screws (A) in
position on hull wall.
Using socket, tighten two screws (A).
3.
4.
Close top right engine grille doors
End of Task
