TM 5-5420-202-20-3
BASKET/CONTROL PANEL POWER HARNESS REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
1.
Route harness assembly (A) behind retaining
straps (B) and through clamps (C), as
shown.
2.
Using 7/16 inch socket, install top
screw (D), new lockwashers (E), and flat
washers (F) to secure strap (B) to
crossbeam (G) at three locations.
Using 7/16 inch socket install screws
3.
(H) and new lockwashers (J) securing clamps
(C) at six locations.
Go on to Sheet 4
Change 7
10-295-29
6.27