TM 5-5420-202-20-3
BASKET/CONTROL PANEL POWER HARNESS REPLACEMENT (Sheet 4 of 4)
4.
Install connector (K) of harness (A)
at basket disconnect (page 10-296.69).
5.
Connect connector (L) at master control
panel. Using spanner wrench, tighten
nut (M).
6.
Connect three ground straps at batteries
7.
Install right bulkhead access cover
page 17-3).
8.
Perform functional check (TM 5-5420-
202-10).
End of Task
5-30
10-296.28
Change 7