TM 5-5420-202-20-3
FORWARD OUTBOARD LEVER ASSEMBLY REPLACEMENT (Sheet 2 of 3)
WARNING
Use effective chip guarding and personal protective
equipment (goggles/shield, gloves, etc.) during cutting
and welding operations. Failure to do so could result in
personal injury.
Remove flammable materials, such as spilled fuel or
P l a c e wet rags or
oil, from immediate area.
nonflamable cloth around area being welded. Follow
safety procedures as listed in TM 9-237 "Operator's
Manual, Welding Theory and Practice."
5. Using torch, remove lever assembly (F) from
supports (G) which are welded to hull.
WARNING
U s e effective chip guarding and personal protective
equipment (goggles/shield, gloves, etc.) during grinding
operations. Failure to do so could result in personal injury.
NOTE
Use grinder to clean old
welds so that new assembly
can be welded in place.
INSTALLATION:
1.
Using C-clamp (A), clamp new lever assembly
(B) in place.
Using torch, weld new lever assembly
2.
(B) in place.
TA249285
Go on to Sheet 3
11-19