TM
5-5420-202-20-3
FORWARD INBOARD BELL CRANK ASSEMBLY REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Install washer (A) and bell crank (B) on stud (C) with long arm of bell crank (B) to left.
2.
Using 9/16 inch wrench, install washer (D), washer (E), and nut (F).
3.
Using pliers, install cotter pin (G).
Aline rod end (H) in long arm of bell
4.
crank (B).
5.
Using 9/16 inch wrench, install bolt
(J) in bell crank (B) through rod
end (H).
6.
Aline rod end (K) in short arm of bell
crank (B).
Using 9/16 inch wrench, install bolt
7.
(J) in bell crank (B) through rod end (K).
8.
Adjust shifting controls and linkages
Install operators floor access plate
9.
(page 17-10).
Remove blocks from tracks.
10.
End of Task
TA249283
11-17