TM 5-5420-202-20-3
SHIFTING CONTROL TO FORWARD INBOARD BELL CRANK ASSEMBLY ROD REPLACEMENT
(Sheet 3 of 5)
DISASSEMBLY:
1.
Holding rod ends (A) with 9/1 6 inch
wrench, use 9/16 inch wrench to back
off nuts (B).
2.
Using 9/16 inch wrench, remove rod
ends (A) and nuts (B) from rod (C).
lNSPECTION:
Inspect rod ends (A), nuts (B), and rod (C) for wear or damage. Replace if required.
ASSEMBLY:
Using fingers, install nuts (B) and rod ends (A) on rod (C).
1.
TA249293
Go on to Sheet 4