TM 5-5420-202-20-3
SHIFTING FORWARD OUTBOARD ROD REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 9/16 inch wrench, remove two
bolts (A) from lever (B) and clevis (C).
2.
Remove rod (D).
Using steel tape, measure center-to-
3.
center distance between holes in rod
end (E) and clevis (C).
4.
Using pencil and paper, write down center-to-center distance.
DISASSEMBLY:
1.
Holding rod end bearing (A) with 9/16 inch
wrench, use 9/16 inch wrench to back off nut
(B).
2.
Using 9/16 inch wrench, remove rod
end bearing (A) and nut (B) from rod
(C).
INSPECTION:
Inspect rod end (A), nut (B), and rod (C) for ear or damage. Replace if required.
ASSEMBLY:
1.
Using fingers install nut (B) and rod end (A) on rod (C).
Go on to Sheet 3
TA249297