TM 5-5420-202-20-3
TRANSMISSION SIDE OIL STRAINER ASSEMBLY SERVICE (Sheet 1 of 8)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Disassembly
Cleaning and Inspection
Assembly
Installation
Hose clamp pliers
TOOLS: Slip joint pliers
Diagonal cutting pliers
1/2 in. socket with 1/2 in. drive
7/16 in. socket with 3/8 in. drive
10 in. extension with 1/2 in. drive
Putty knife
Ratchet with 1/2 in. drive
1/2 in. combination box and open
12 in. adjustable wrench
end wrench
3/4 in. socket with 1/2 in. drive
Torque wrench with 3/8 in. drive (0-200 lb-in)
Tube bender
9/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
SUPPLIES:
5/16-18 in. jackscrews (2 required)
Rags (Item 65, Appendix D)
Gaskets (3 required)
Lockwire (Item 61, Appendix D)
Preformed packing
Gloves (Item 69, Appendix D)
Washer seals (6 required)
Goggles (Item 70, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Lockwashers (8 required)
PRELIMINARY PROCEDURES:
Drain transmission oil (page 6-8).
Remove powerplant (page 5-2)
Remove left brake control housing (page 13-64)
REFEREN CE: LO 5-5420-202-12
Go on to Sheet 2