TM 5-5420-202-20-3
PARKING BRAKE CONTROL ASSEMBLY (ENGINE COMPARTMENT) REPLACEMENT (Sheet 5 of 15)
21.
Using long nosed pliers, remove cotter
pin (AQ).
Using 9/16 inch wrench, remove nut
22.
(AR).
23.
Remove two flat washers (AS).
24.
Remove bellcrank (AH).
NOTE
Manually move control assemblies (F) and (S) into "P" park position
by pushing both clevises in.
Using 9/16 inch wrench on flats (AT)
25.
of control assembly (F) and 7/8 inch
wrench on nut (AU), back off nut (AU)
until it falls.
26.
Using flat-tip screwdriver, pry packing
with retainer (AV) off control assembly
until it falls onto nut (AU).
Using long nosed pliers, remove cotter
27.
pin (AW).
TA249495
Go on to Sheet 6
13-111