TM 5-5420-202-20-3
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (REAR ONLY OF TWO-PIECE) (Sheet 3 of 6)
At transmission bellcrank assembly
5.
using pliers, remove clip (G) and
pin (H) securing connector (J) to
bellcrank (K).
Using a 9/16 inch socket and extension,
6.
remove two screws (L), washers (M)
and bracket (N) from bracket assembly (P).
7.
Using 9/16 inch wrench on nut (Q) and
adjustable wrench, remove connector (J)
and nut (Q).
Us an adjustable wrench to hold support
8.
bracket (N). Using a 15/16 inch wrench,
remove nut (R) and preformed packing (S).
Throw away packing (S).
Using a 15/16 inch wrench, remove nut (T)
9.
and lockwasher (U) from control assembly (C).
Remove support bracket (N) and lockwasher (V).
Using a 15/16 inch wrench, remove nut
10.
(W) from control assembly (C).
TA249508
13-124
