TM 5-5420-202-20-3
COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 3 of 4)
Get roadwheel arm lifter tool.
2.
Place lifter to inside of track over spindle
3.
stub, track pad, and end connector that
is forward of roadwheel.
Have second person start engine and drive
4.
vehicle forward slowly.
Direct second person to stop vehicle when
5.
lifter is straight up and down.
6.
Roadwheel should be up off track centerguides.
7.
Set vehicle brakes (TM 5-5420-202-10).
Shut engine off (TM 5-5420-202-10).
WARNING
Failure to block vehicle properly
may result in injury or death to
personnel.
8.1 On both sides of vehicle, position
wooden blocks between track and
roadwheel at front and rear of
roadwheel.
Go on to Sheet 4
Change 4
14-52