TM 5-5420-202-20-3
COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 2 of 4)
REMOVAL:
NOTE
There are six roadwheel positions
No. 1 through No. 6 on each side
of vehicle.
There are two roadwheels at each of
these 12 positions for 24 roadwheels
at ground level. In addition, there is
a compensating idler wheel at front
top on each side of vehicle. Each
compensating idler consists of two
road wheels.
Thus, there are four
roadwheels in addition to 24 at
ground level - 28 roadwheels in all.
WARNING
Position vehicle on firm level ground to prevent vehicle
movement that may result in injury or death to personnel.
1.
Using 1-9/16 inch socket wrench, loosen 10 nuts (A). Do not remove.
NOTE
On compensating idler wheel only, disconnect track
(TM 5-5420-202-10) and proceed to step 9.
GO on to Sheet 3