TM 5-5420-202-20-4
SLIPRING BOX ACCESS COVER REPLACEMENT (Sheet 1 of 1)
TOOLS:
9/16 in. combination box and open end wrench
Putty knife
SUPPLIES:
Gasket
Remove
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Use wrench to remove six screws (A)
and lock washers (B) securing cover (C)
and gasket (D).
2.
Remove cover (C) and gasket (D). Throw
gasket away.
3.
Using putty knife, remove all gasket
and adhesive residue.
INSTALLATION:
Apply adhesive to new gasket (D).
1.
Position gasket (D) and cover (C)
2.
with holes alined over opening in floor.
Reaching through floor plate access
3.
opening, use wrench to install six
4.
End of Task
TA248547