TM 5-5420-202-20-4
FRONT DRAIN VALVE CONTROL LEVER REPLACEMENT (Sheet 1 of 1)
TOOLS: 1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
REMOVAL:
Using socket, remove nut (A), lockwasher (B), flat washer (C), and lever (D) from stud (E).
Push down on knob (F) and remove lever (D).
INSTALLATION:
1. Put lever (D) on stud (E) and in groove on knob (F). Push down on knob (F) to install lever (D).
2.
Using socket, install flat washer (C), lockwasher (B), and nut (A) on stud (E).
3.
Operate front drain valve and make sure valve opens and closes smoothly. If lever does
not operate smoothly, loosen nut (A) slightly and operate valve again.
End of Task
TA248549
