TM 5-5420-202-20-4
REAR DRAIN VALVE LINKAGE ADJUSTMENT (Sheet 7 of 7)
28.
Using wrench, tighten rear coupling jamnut (J) while holding coupling (K) with wrench.
29.
Using wrench, tighten clevis jamnut (G) while holding clevis (C) with pliers.
30.
Make sure drain valve opens when control lever is in open position (step 18).
If drain valve does not open, repeat steps 19 through 30.
If drain valve opens, go to step 31.
31.
Install powerplant (page 5-14).
End of Task
TA248577