TM 5-5420-202-20-4
REAR DRAIN VALVE LINKAGE ADJUSTMENT (Sheet 3 of 7)
Adjust clevis (C) and jamnut (G) until one
9.
inch of threads can be measured on rod (H).
10.
Using wrench, tighten jamnut (G) while
holding clevis (C) with pliers.
11.
Turn rod (H) by hand until holes in clevis (C)
and hole in lever (E) can be lined up
using clevis pin (B).
12.
Using fingers, push clevis pin (B) through
holes in clevis (C) and hole in lever (E).
13.
Using wrench, tighten rear coupling jamnut (J)
while holding coupling (K) with another
wrench.
Go on to Sheet 4
TA248573
17-42