TM 5-5420-202-20-4
OUTER EXHAUST TUBE REPLACEMENT (Sheet 1 of 1)
TOOLS: 9/16 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
REMOVAL:
Using socket, remove two screws (A) and lockwashers (B). securing two clamps (C) to
1.
hull.
Using socket and wrench, remove two nuts (D), lockwashers (E), washers (F), and screws (G).
2.
Using hands, pull exhaust tube (H) from elbow (J).
3.
4.
Using hands, spread and remove two clamps (C) from exhaust tube (H).
Using socket and wrench, remove two nuts (K), lockwashers (L), washers (M), screws (N),
5.
and clamp (P) from exhaust tube (H).
INSTALLATION:
1.
Using hands, squeeze two clamps (C) into position on exhaust tube (H).
Using hands, push exhaust tube (H) into position in elbow (J).
2.
Using socket and wrench, install clamp (P), two screws (N), washers (M), lockwashers
3.
(L), and nuts (K).
Using socket and wrench, install two screws (G), washers (F), lockwashers (E), and nuts (D).
4.
Using socket, install two screws (A) and lockwashers (B) securing two clamps (C) to hull.
5.
TA248621
End of Task