TM 5-5420-202-204
PERSONNEL HEATER AIR DUCT OUTLET HOSE AND DEFLECTOR REPLACEMENT
(Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
7/16 in. open end wrench
Flat-tip screwdriver
Lockwashers (7 required)
SUPPLIES:
REMOVAL:
Using screwdriver, loosen hose clamp
1.
(A).
Using 9/16 inch socket, remove two screws (B), lockwashers (C), and nuts (D) securing
2.
clamp (E) to pads.
Remove clamp (E).
3.
Hold nut (F) with 7/16 inch wrench. Use 7/16 inch socket to remove screw (G),
4.
lockwasher (H), washer (J), and spacer (K) securing deflector (L) to bracket (M).
Pull deflector (L) from hose (N).
5.
TA248616
Go on to Sheet 2