TM 5-5420-202-20-4
EXTERIOR RELEASE HANDLE BODY ASSEMBLY REPLACEMENT (Sheet 3 of 4)
NOTE
These instructions describe installation
of either body assembly.
INSTALLATION:
Thread cable (A) into socket (B).
1.
Lay cable (A) in groove around plug
2.
(C). Allow a minimum of 1/8 inch of
cable extending beyond plug (C).
Using pliers, seat plug (C) into socket
3.
(B).
Install fastener assembly (D) into body
4.
assembly (E).
Using 1/2 inch wrench, tighten fastener
5.
assembly (D) into body assembly (E).
TA248699
Go on to Sheet 4
