TM 5-5420-202-20-4
1.
Manually disconnect electrical connectors
(A) from solenoids(B).
2.
Using 7/8 inch wrench, disconnect elbow-
elbow (D).
3.
Using 11/16 inch wrench, disconnect
output fuel hose (E) from 45-degree
elbow (F).
4.
Using 7/16 inch wrench to hold screw
and 7/16 inch socket and extension on
nut, remove nut and screw (G) and remove
ground wire (H) from bracket.
Using pliers, cut and remove lockwire
5.
(J). Throw lockwire away.
6.
Using 3/4 inch socket, remove two screws
(K) securing bracket (L) to engine.
7.
Remove bracket (L) and attached sole-
noids (B) with fittings as a unit.
Go on to Sheet 3
TA248767
21-26