TM 5-5420-202-20-4
SMOKE GENERATOR FRONT ENGINE FUEL HOSE REPLACEMENT (Sheet 4 of 4)
Manually install tee(E) onto bulkhead elbow (F).
5.
Manually connect fuel water separator hose (G) onto tee (E).
6.
7.
Manually connect smoke generator fuel hose (B) to tee (E).
Adjust positions of tee (E) and hoses (B and G) to avoid interference with other parts.
8.
Using wrench, tighten tee (E) to elbow (F) and hoses (B and G) to tee (E).
WARNING
Do not activate smoke generator in a building or closed area or with personnel near.
CAUTION
Always be aware of wind direction and speed when using smoke generator.
Start engine (TM 5-5420-202-10) and run until normal operating temperatures are attained.
9.
Run engine at 1600 rpm and activate smoke generator. Observe operation. Shut off
smoke generator. Shut down engine.
10. Check smoke generator fuel lines for leaks. Correct as necessary.
11.
Install upper bulkhead engine access cover (page 17-12).
12.
Install engine shroud (page 9-31).
TA248783
End of Task
21-42
