TM 5-5420-202-20-4
SMOKE GENERATOR FRONT ENGINE FUEL HOSE REPLACEMENT (Sheet 3 of 4)
Using socket, remove three assembled washer screws (F) securing clamps (G) to engine.
6.
Using wrench, disconnect smoke generator fuel hose (A) from fuel shut-off valve (B).
7.
Remove smoke generator fuel hose (A) from engine.
8.
Remove three clamps from hose (G) and throw hose away.
9.
INSTALLATION:
Install three clamps (A) onto smoke generator fuel hose (B).
1.
Position smoke generator fuel hose (B) under electrical cables and along edge of shroud
2.
as indicated.
Position clamps (A) along hose (B) and, using socket, install assembled washer screws
3.
(C).
Remove cap from inlet port of fuel shut-off valve (D) and manually connect smoke generator
4.
fuel hose (B) to inlet port of fuel shut-off valve (D). Using wrench, tighten hose (B)
to fuel shut-off valve (D).
Go on to Sheet 4