TM 5-5420-202-20-4
MATERIAL
FABRICATING
REQUIREMENT
DESCRIPTION
STOCK
8.
GRIND OR FILE APPROXIMATELY 1/8"
OFF THE TWO INSIDE CORNERS OF THE
CLIPS AT EACH END, TO AID TOOL
ENGAGEMENT.
WELD THREE GUIDE CLIPS TO EACH
9.
SEMI CIRCULAR FLANGE PIECE.
NOTE
THE TWO CLIPS ON THE ENDS SHOULD BE ANGLED
OUT SLIGHTLY.
WELD APPROXIMATELY 48" OF SMALL
10.
LINK CHAIN (WITH AN EYE AT THE
FREE END) TO THE CENTER CLIP.
Figure F-4. Final drive adapter hook-up tool (Sheet 2 of 2 ) .
