TM 5-5420-202-34
FUEL LINES REPLACEMENT - PRIMER PUMP LINES (INLET) (OUTLET) FROM BULKHEAD
TO ENGINE COMPARTMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
4-89
Installation
4-91
TOOLS:
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
5/8 in. combination box and open end wrench
1/2 in. combination box and open end wrench
9 / 1 6 in. combination box and open end wrench
11/16 in. combination box and open end wrench
Rags (Item 28, Appendix B)
SUPPLIES:
PRELIMINARY PROCEDURES:
Remove left fuel tank (page 4-24)
Remove bulkhead access cover (TM 5-5420-202-20)
REMOVAL:
1.
Using 11/16 inch wrench to hold nipple (A), use 9/16 inch wrench to disconnect tube
assembly connecting nut (B).
2.
Using 11/16 inch wrench to hold nipple (C), use 5/8 inch wrench to disconnect tube assembly
connecting nut (D).
Place rags under nuts (B) and (D) to catch dripping fuel.
3.
Go on to Sheet 2
4-89
