TM 5-5420-202-34
FUEL LINES REPLACEMENT - PRIMER PUMP LINES (INLET) (OUTLET) FROM BULKHEAD
TO ENGINE COMPARTMENT (Sheet 2 of 4)
4.
Using 7/16 inch socket, remove two
screws (E), lockwashers (F), and four
clamps (G) and (H).
5.
Using 7/16 inch socket and 7/16 inch
wrench, remove screw (J), clamp (K),
lockwasher (L), and nut (M).
6.
Using 1/2 inch wrench to hold adapter
(N), use 5/8 inch wrench to disconnect
tube assembly nut (P).
7.
Using 1/2 inch wrench to hold adapter
(Q), use 9/16 inch wrench to disconnect
tube assembly nut (R).
8.
Remove tube assemblies
(S) and (T).
Go on to Sheet 3
4-90
