TM 5-5420-202-34
ACCELERATOR CONTROL LINKAGE ASSEMBLY REPAIR (Sheet 2 of 13)
DISASSEMBLY:
1.
Using 1/2 inch wrench, remove four screws and lockwashers (A) holding cover (B) to riser
housing (C).
Using pry bar, pull cover (B) from
2.
riser housing (C).
3.
Pull away seal (D). Discard seal (D).
4.
Using 7/16 inch wrench, remove
bolt (E) holding connecting
link (F) to lever assembly
(G).
5.
Move connecting link (F)
away from lever assembly
(G) .
6.
Using 1/2 inch wrench, remove
seven screws and lockwashers
(H) holding riser housing (C)
to control housing assembly
(J).
Go on to Sheet 3
4-100
