TM 5-5420-202-34
COMPENSATING IDLER ARM ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 2 of 5)
Using two persons, place compensating idler arm assembly on work bench.
1.
Ensure area is clear of combustible materials to prevent fire.
Wear goggles and gloves to prevent injury.
2.
Using oxygen-acetylene torch as a heat source, apply heat to spacer (A). Using hammer
and chisel, drive spacer (A) off lower spindle (B) of roadwheel arm (C). Throw spacer
(A) away.
Examine bearing surface of spindle (B) for any cuts or marks made during removal of
3.
spacer (A).
4.
Using crocus cloth (Item 3, Appendix B), smooth cuts or marks made on lower spindle
(B) during removal.
Go on to Sheet 3
9-25