TM 5-5420-202-34
COMPENSATING IDLER ARM ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 5 of 5)
4.
Using two persons, reposition idler arm
on arbor press.
5.
Position spacer (F) over idler arm spindle (G).
6.
Position 4 inch inside diameter drive
collar bushing over spacer (F).
7.
Using arbor press, drive spacer (E) onto
spindle (G) of the compensating idler
arm (C).
NOTE
Seat spacer firmly all the way down
to the bottom of the spindle.
End of Task
9-28
