TM 5-5420-202-34
COMPENSATING IDLER ARM ASSEMBLY REPAIR (LEFT AND RIGHT) (Sheet 4 of 5)
ASSEMBLY:
1.
Using two persons, position compensating idler arm (A) on arbor press.
Position bearing (B) over idler arm upper spindle (C).
2.
Position 4-9/16 inch inside diameter drive collar bushing over spindle (C) onto bearing
3.
(B) and, using arbor press, drive bearing (B) onto spindle (C) of idler arm (A).
NOTE
Seat bearing firmly all the way to
the bottom of the spindle.
Go on to Sheet 5
9-27
