TM 5-5420-202-34
TRACK ADJUSTING LINK REPAIR (Sheet 12 of 13)
Install new packing (V) on relief valve
25.
assembly (U). Coat threads of valve assembly
(U) with grease (Item 14, Appendix B).
26.
Using 15/16 inch socket and torque wrench,
install valve assembly (U) and packing
(V) in hole (T) in adjusting link yoke (C).
Tighten valve assembly to 40-60 lb-ft
(54-81 Nm).
Using 3/8 inch wrench, remove pipe plug
27.
(Z) from track adjusting link (A).
28.
Using pliers, take clip (L) out of locking
pin (K).
Pull locking pin (K) out of hole 2 in frame
29.
(J) to unlock slide (H).
Push slide (H) back and pull test fixture
30.
pin (F) out of adjusting link bearing (G).
Take track adjusting link (A) out of test
31.
fixture (B).
Go on to Sheet 13
9-40
