ARMY TM 5-5420-212-10-1 MARINE CORPS TM 08676A-10/1-1 FIGURE 3-16 DS 22 Bay with LRS-Distance R,T,G,H &N m. Rule 1 Use a LNCG setting to give adequate nose clearance (N) and tai clearance  ). See Table 3-33, column g), (h) or (i). Both roller beams are in the low position. (1) Choose a NCG setting from Table 3-33, columns (g) (h) or ( which give an N greater than H  If none of these three choices meet the criteria. choose the highest value available. (2) Check to see if the T value from Table 333, column (j) is greater than G. (3) If N is greater than H or if T is not greater than G, proceed to Rule 2.  If N is greater than H and T is greater  than  G  the  LNCG  setting  chosen  has  adequate  nose  lift  and  the  bridge  selected  has  adequate  tail  clearance proceed to loads required Table 3-33. Rule 1 - DS 13-22 Bay with LRS Nose Lift N with Nose Cross Girder at: (both CRB and RRB in high position) 2E + No. of Bays Setting No. 6 Yellow (g) Setting No. 4 Yellow (h) Setting No. 2 Yellow (i) Tail Lift T (j) 13 0.48 1.87 3.52 0.40 14 0.31 1.72 3.35 0.37 15 0.25 1.64 3.29 0.34 16 -0.62 1.27 3.25 0.30 17 -0.77 1.12 3.10 0.27 18 -1.06 0.80 2.71 19 -1.46 0.40 2.32 0.21 20 -1.75 0.11 2.03 21 -2.08 0.05. 1.75 0.18 22 -2.44 -0.31 1.40 0.15 3-46