ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
NOTE
One person on each side of pallet should pull toward the trailer on the free ends of the bumper
assembly rope.
(9)
Move trailer forward, letting pallet fall to ground.
(10) Disconnect extractor cable. Store cable to prevent loss or damage.
(11) Move trailer away from bridge building area.
b.
Off-Loading Pallets from Truck
The pallet can be removed from the truck with the aid of an extractor cable, or by dumping the extractor end the
pallet on the ground. If the pallet is dumped, omit steps (5) and (6) of the following procedures. If an extractor cable is
used, perform all steps of the procedure.
(1)
Release two anchor chains by pulling down and out on chain release levers.
(2)
Remove chains from truck; store chains in a safe place to prevent damage or loss.
(3)
Remove rubber bumper from pallet.
3-134
