ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(2)
Carry the bottom panel into place by walking directly behind the top panel.
(3)
Lift rear end of bottom panel so that it is slightly higher than the front.
(4)
Guide the top jaws around the ends of the panel pin connecting the top panels.
(5)
Lower rear end of bottom panel.
(6)
Close and lock the shootbolts.
(7)
Bear down on rear end and at the same time lift and push forward at the front so that the resilient mount and
guide slot line up the pin holes in the bottom panel jaws.
(8)
Slide in panel pin until shoulder butts against the jaws.
CAUTION
Ensure that retainer clip In bottom panel Is In the horizontal position to prevent it from damaging
rocking rollers.
(9)
Put retainer clip through end of pin in horizontal position.
4-19
